Truck Rubber bearing OEM 3954100022 Mercedes Benz Drive Shaft

Truck Rubber Bearing OEM 3954100022 Mercedes Benz Drive Shaft

Truck Propeller Shaft Drive rubber Support Center Bearing for Mercedes Benz 395 410 0022 Chinese factory

AUTO PARTS DRIVERSHAFT SUPPORT for Mercedes Benz OEM:4604100222, 4604100022

(1) The reason for the damage of the hanger bearing is the lack of lubricating oil in the bearing, which causes the bearing to wear or ablate and loosen, or because of disrepair for a long time, the outer diameter of the bearing and the seat hole are rotated loose, and the rubber ring around the bearing seat Cracking or falling off, etc., cause the drive shaft to jump in the hanger, causing the lower half of the hanger to break, the bolts to break, and the bolt joints to break.

(2) The cause of the damage of the transmission shaft components is the deformation of the front and rear transmission shafts, the universal joint shaft fork, the joint flange, and the extension joint keyway shaft, which causes the axis swing difference when the entire transmission shaft is driven; or the lack of slippage of the universal joint Excessive wear and looseness caused by oil; or aggravated wear and looseness between the sliding joint groove and the groove due to the expansion joint. When the whole set of transmission shafts are in transmission, the gap is increased and axis vibration occurs, and the center hanger is affected by the shock for a long time and the lower part is broken.

(3) The central hanger of the transmission shaft of the truck has kept the center bracket of the bearing seat (tile frame) type on the middle beam in the automobile since the 1940s. The material is casted with malleable cast iron (ma steel). This structure The hanger is only suitable for trucks with relatively low tonnage (some modern drive shaft center brackets are made of steel plate rolled and welded, and are fitted in the middle beam, which is more secure). The cast hanger is prone to fracture layer due to improper technology, loose metal or pores, and brittle material. During the warranty installation of the center hanger, due to the improper method of tightening the bolts, the hanger or hanger cover is not installed evenly and evenly, so that the hanger or hanger cover is tilted, and a certain point of stress is concentrated and breaks. The frame is broken.

Image description:

product advantages

1. Excellent sealing effect.
2. Excellent resistance to sunlight, ozone, and weathering.
3. Long use life and excellent compression rate,good resistance to high and low temperature.
4. Low permanent compression deformation rate.
5. Has moderate oil resistance
6. With high precision

3954100022 Mercedes Benz Drive Shaft

3954100022

Mercedes Benz Propeller Shaft Bearing

Truck Rubber bearing OEM 3954100022 Mercedes Benz Drive Shaft Images